Email： [email protected]
Address： E-15, Huaqiang International, Shanda Road, Lixia District, Jinan, Shandong,China
Fiber metal laser cutting machine commonly cutting materialFiber metal laser cutting machine commonly cutting material:
With pure oxygen as an auxiliary gas cutting steel, can cut carbon steel plate maximum thickness 20mm or more, for thick sheet kerf is 0.3mm. For thin kerf is about 0.2mm.
(2) Stainless Steel
Cutting stainless steel using high-pressure nitrogen as auxiliary gas. can cut stainless steel plates maximum thickness of 10mm or more, for use of stainless steel sheet and S-06 as the main component is an effective working tool. Trimming heat affected zone is very small, can effectively maintain the good corrosion resistance of these materials.
(3) aluminum and aluminum alloys
Metal laser cutting machine cutting aluminum using high-pressure nitrogen as auxiliary gas. Aluminum cutting belong to melt cutting mechanism, since the aluminum is higher laser reflectivity. Only a thin aluminum sheet can be cut. The auxiliary gas is mainly used to blow away the molten product from the cutting area.
(4) Copper and Copper Alloys
Copper (copper) due to the reflection rate is too high, basically can not be cut with a CO2 laser beam.