Welcome to Jinan Dekcel CNC Equipment Co.,Ltd
24 hours service hotline
+86-13356681090
Support
Contact Us

Hotline:

+86-13356681090

Email: [email protected]

Address: E-15, Huaqiang International, Shanda Road, Lixia District, Jinan, Shandong,China

Fiber laser cutting machine optical path adjust method

Fiber laser cutting machine optical path adjust method:
 
1, Check whether the laser can dot on the reflective lenses.(Use plastic sheet shelter first reflective mirror, press the TEST button to see the laser light dot position)If the laser can not on the first lens,then adjust the first lens position .
 
2,Check whether the laser can dot on second and third reflective lens,if not,adjust the primary mirror M1,M2,M3 screw.
 
3,At the entrance of the laser tube, posted two double-sided adhesive.Moved laser head to upper right corner of the table press TEST on control panel,dot the laser spot.
 
4,Moved laser head to upper left corner of the table dot the laser spot,observation whether the spot same location with upper right corner,if not adjust the second lens M1,M2,M3 screw.
 
5,Moved laser head to lower left corner.observation whether the spot same location with upper right corner,adjust second reflective lens.
 
6,Repeatedly adjust the laser spot,final three points in the same position.
 
7,Check whether the focus at the center:put a mirror vertically below the focusing mirror,in the barrel (by hand) transparent plastic sheet press TEST beat the laser,to see whether laser spot at the center of focusing lens.Don't put hands in the vertical lens range.
 
Live Chat
+86-13356681090